How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that is full of appeal for drivers. It has good visibility and an efficient engine. It also has a high safety rating.
However, it is important to make sure that you have two keys that work for your car. It is costly to replace a key in the event that you lose it.
How to replace the ignition Key in the Saab9-3
You need to replace the car key if it won't turn. This guide will guide you through how to do it on a Saab 9-3. You'll need a new key and a new battery that can be reprogrammed and a brand new key-fob cover.
Unlike older models, most modern Saab cars use a transponder in the key-fob instead physical metal key to unlock and start the car. The problem with this is that the reprogrammable battery on the key-fob can wear out and not hold a charge for long. This is particularly true if you use the same key for the lock you have.
The good thing is that the battery is easily replaced by an experienced locksmith. If you have the right tools and patience, you can do it yourself. The first step is to remove the key-fob. Insert flatheads into the slot in the middle of your case. You will need to take your time, as the plastic is thin and can easily be damaged.
Once the case has been opened, you can make the new key by combining the lower part of the old key with transponder and banana. This will ensure that the new key is correctly paired to your CIM that can make a significant difference when replacing the sole key on your Saab 9-3.
How to replace the ignition Key on the Saab 900
Unless you have two keys, you'll need to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting how to get a saab replacement key . Once the battery is disconnected, you can take off the dashboard and trim pieces around the steering wheel. Once the dashboard is removed, you can insert screws into the hole behind the ignition switch.
The ignition barrel has an ignition lock that can prevent the car from starting if a key isn't present in the. If the ignition switch on your 900 doesn't work properly, check to see whether the key is inside the lock or snared in the barrel of ignition. It's also recommended to rotate your keys often and keep them clean so that one doesn't get bent.
Saab cars differ from other cars in that they do not have traditional keys made of metal. Instead, the car recognizes electrical signals that come from the key fob through an specialized microchip inside.
If you only lose one functioning key fob, your dealer will charge you an additional fee to replace your computer module (also known as the CIM). However, we can reprogram the computer's EEPROM, and then prepare it to accept new keys without replacing it. This can save you over 50% of what the dealer charges! We call it the SAAB Key PROGRAM. Find out more here!
How to replace the ignition Key on a Saab 9-5
The metal part of the classic Saab keys is simple to duplicate and does not pose a serious threat to theft of vehicles. The real security comes from the electronic part inside the key-fob. It is equipped with a chip that recognizes your car when it's inserted into your ignition switch.
Saab's anti-theft device has been relying on this technology for over a decade. It's not as effective as a door lock however it makes stealing your car a lot harder. This is why every Saab owner should always have an extra key on hand.
The majority of new Saabs are delivered with two keys. However, they are also available for purchase at the dealer's expense using a handheld device, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, which have more modern and advanced features that require a separate key-fob and use a different method of operation.
If you lose all keys, the dealer will replace your CIM or TWICE modules, and charge you an extra fee. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.
How to Replace the Ignition Key in a Saab XC90
If your SAAB 9-3 key fob starts having trouble turning the lock barrel, it may be time to replace it. The process is simple and you don't need to visit a dealership. Instead you can complete the process yourself at home using some basic tools.
First, you'll need to make the new keys. Before you start, disable the anti-theft system by placing blocks under your rear wheels and releasing your handbrake. Place the key in the ignition, and then turn it to the "on" position. This will activate the accessories, but it will not start the engine. Repeat this procedure 5 times, then turn off the key on the "on" position.
You'll need to purchase an additional case for your key fob. You can find these at any auto parts store, and they're generally quite affordable. Depending on the model, you may even purchase them without electronics.
To open up the case, place a flathead screwdriver in the slot located in the middle, and gently work it. Once you split the case, you will be able to access all the internal electronics. To remove the electronics, make use of a small screwdriver and try to pry them out with a gentle force.
